ABOVE-GROUND
Parts
Browse pools, styles, and options. Find the right fit and get a fast quote from a local dealer.
SUBCATEGORY
Filter Parts
DURABLE • LONG WARRANTY
2" PRESSURE GAUGE - 0-30 PSI
- Monitors filter system pressure in real time to signal when backwashing is needed and confirm the system is operating within safe parameters
- Standard 0-30 PSI range covers the full operating spectrum of above-ground pool sand filters
- Brass fitting and easy-to-read dial face built for continuous outdoor use
Specifications & documents
- SKU: 395-1014
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
COMPACT TANK CLAMP (HALF) - BLACK
- Replacement half-clamp secures the upper and lower tank sections of compatible filter housings for a leak-free seal
- Black finish matches dark-housing filter models for a clean, factory appearance
- Durable molded construction maintains consistent clamping pressure season after season
Specifications & documents
- SKU: 340-2281
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
COMPACT TANK CLAMP (HALF) - LT. OAK
- Same reliable half-clamp design as the black version, finished in light oak to match beige and tan filter housings
- Keeps the filter tank sealed securely at the mid-body seam to prevent leaks under operating pressure
- Direct replacement part for compatible Doughboy filter models
Specifications & documents
- SKU: 340-2183
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
FILTER BASE - LT. OAK
- Replacement base ring stabilizes the filter tank and keeps it level on the equipment pad
- Light oak finish matches standard beige filter housings for a consistent, finished look
- Molded resin construction supports the full weight of a filled filter tank without cracking or shifting
Specifications & documents
- SKU: 340-2148
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SIDE SEAL VALVE W/BASKET EXT
- Complete replacement multiport valve with integrated basket extension for compatible above-ground pool filter systems
- Side-seal design ensures a pressure-tight connection between the valve body and tank to prevent bypass leaks
- Controls all filtration modes from a single valve point, restoring full filter functionality when the original valve fails
Specifications & documents
- SKU: 1107-2468
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
V-GRID (SINGLE)
- Replacement DE filter grid captures diatomaceous earth media and holds it in place during filtration cycles
- Single grid replacement allows targeted servicing without replacing the entire grid assembly
- Precision-fit design maintains even flow distribution across the filter surface for consistent water clarity
Specifications & documents
- SKU: 1111-1012-1
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
VALVE HANDLE
- Direct replacement handle restores easy manual control of the multiport valve without replacing the entire valve assembly
- Lever-style grip provides a firm, comfortable hold for switching between filter, backwash, rinse, and other modes
- Compatible with standard Doughboy multiport valve bodies
Specifications & documents
- SKU: 340-2228
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
VALVE O-RING
- Critical sealing component prevents water bypass between the valve body and tank connection
- Replacement o-ring restores a pressure-tight seal when the original becomes worn, cracked, or brittle
- Sized to fit standard Doughboy multiport valve assemblies
Specifications & documents
- SKU: 308-1280
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
VALVE O-RING GROOVE FILLER
- Fills the o-ring groove to maintain proper sealing geometry when the groove shows wear or distortion
- Prevents o-ring migration and bypass leaks that reduce filter efficiency over time
- Simple, low-cost fix that extends the service life of the valve body without full replacement
Specifications & documents
- SKU: 308-1282
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
VALVE ROTOR
- Internal replacement rotor directs water flow through the correct valve ports for each filtration mode
- Worn or cracked rotors cause cross-flow and loss of backwash function — direct replacement restores full valve performance
- Precision-molded to maintain tight port alignment under operating pressure
Specifications & documents
- SKU: 340-2229
- Shipping weight: 0.00 lb
DURABLE • LONG WARRANTY
VALVE ROTOR PIN SET
- Replacement pin set secures the rotor in proper alignment inside the valve body
- Worn or broken pins cause the rotor to slip out of position, resulting in poor mode selection and bypass leaks
- Inexpensive hardware fix that restores precise valve operation without replacing the full rotor or valve
Specifications & documents
- SKU: 1121-1644
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
VALVE SPIDER GASKET
- Seals individual port channels inside the multiport valve to prevent water from bypassing between modes
- Worn spider gaskets are the most common cause of filter valves leaking to waste or losing backwash efficiency
- Direct replacement gasket restores clean port separation and full multiport valve function
Specifications & documents
- SKU: 1121-1632
- Shipping weight: 1.00 lb
SUBCATEGORY
Pump Parts
DURABLE • LONG WARRANTY
IMPELLAR ASSEMBLY PPII 1 ½ H.P.
- Direct replacement impeller assembly restores full flow and pressure to 1½ HP PowerLine PPII pumps when the original shows wear, cracking, or reduced performance
- Precision-balanced design maintains efficient water movement and minimizes motor strain during continuous operation
- OEM-spec fit eliminates guesswork and ensures proper clearance inside the volute
Specifications & documents
- SKU: 1107-1547
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
IMPELLAR ASSEMBLY PPII 1 HP, 1085, 1086, 1095, 1096
- Replacement impeller assembly compatible with 1 HP PowerLine PPII models and select legacy pump models (1085, 1086, 1095, 1096)
- Restores full hydraulic performance when the pump shows reduced flow, cavitation, or visible impeller damage
- Direct-fit replacement sized specifically for listed model numbers
Specifications & documents
- SKU: 1107-1388
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
PUMP SEAL 5/8″
- Mechanical shaft seal prevents water from migrating along the pump shaft into the motor, protecting against premature motor failure
- 5/8" sizing fits standard PowerLine pump shaft diameters — a common wear item that should be replaced any time the pump is opened for service
- Replacing a worn seal at first sign of leakage prevents significantly more costly motor damage
Specifications & documents
- SKU: 308-1263
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
PUMP VOLUTE
- Replacement volute housing channels water flow from the impeller to the pump outlet for maximum efficiency
- Cracks or wear in the volute cause pressure loss and cavitation — direct replacement restores proper hydraulic performance
- Beige finish and OEM dimensions ensure proper fit with compatible PowerLine pump models
Specifications & documents
- SKU: 340-2518
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SEAL SPRING
- Companion spring to the mechanical pump seal maintains consistent pressure against the seal face to prevent shaft leakage
- Worn or collapsed springs allow the seal to lose contact and begin leaking — inexpensive replacement that restores a watertight shaft seal
- Should be replaced together with the pump seal during any seal service for reliable, long-lasting results
Specifications & documents
- SKU: 308-1264
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
STRAINER COVER
- Replacement strainer pot lid seals the basket chamber and allows quick access for routine debris removal
- Secure fit maintains suction-side pressure for consistent pump performance during operation
- Durable molded construction resists warping and UV degradation through seasons of outdoor use
Specifications & documents
- SKU: 340-2415
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
STRAINER COVER W/DECAL (PP II)
- OEM replacement strainer cover for PowerLine PP II pump models, including the branded decal for a factory-correct appearance
- Maintains a proper airtight seal on the strainer pot to preserve pump prime and suction efficiency
- Direct replacement for PP II models when the original cover cracks, warps, or loses its sealing surface
Specifications & documents
- SKU: 1121-1076
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SWITCH 2 POSITION UL PPI & PPII
- Replacement on/off switch restores manual pump control for PowerLine PPI and PPII models when the original switch fails or becomes unreliable
- UL-listed component meets safety standards for wet outdoor electrical environments
- Direct drop-in replacement requiring no modification to the pump housing or wiring
Specifications & documents
- SKU: 303-1109
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SWITCH NUT UL PPI & PPII
- Replacement retaining nut secures the power switch in the pump housing for PowerLine PPI and PPII models
- Prevents switch movement and maintains proper electrical contact during pump operation
- Small but critical hardware component that keeps the switch assembly firmly seated and safely secured
Specifications & documents
- SKU: 303-1110
- Shipping weight: 1.00 lb
SUBCATEGORY
Skimmer Parts
DURABLE • LONG WARRANTY
BASKET HANDLES
- Replacement handles make lifting the skimmer basket out of the housing quick and clean without reaching into the water
- Durable molded construction resists warping and breakage through repeated wet/dry cycles
- Direct fit for compatible Doughboy skimmer basket models
Specifications & documents
- SKU: 321-1002
- Shipping weight: 2.00 lb
DURABLE • LONG WARRANTY
DELUXE SKIMMER BASKET
- Fine-mesh replacement basket captures leaves, insects, and fine debris before they reach the pump and filter
- Deeper basket volume holds more debris between cleanings, reducing how often emptying is required
- Durable molded resin construction maintains its shape and mesh integrity through continuous use
Specifications & documents
- SKU: 340-1139
- Shipping weight: 2.00 lb
DURABLE • LONG WARRANTY
FACE PLATE SKIMMER GASKET
- Replacement gasket seals the skimmer face plate to the pool wall, preventing water from bypassing the skimmer housing
- Worn or brittle gaskets are a leading cause of skimmer leaks — direct replacement restores a watertight fit
- Sized to fit standard Doughboy through-wall skimmer face plates
Specifications & documents
- SKU: 307-1027
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
HAIR & LINT POT BASKET ASSY (STD Skimmers & PP I)
- Complete replacement basket assembly for standard skimmers and PowerLine PP I pump models captures hair, lint, and fine debris before it reaches the impeller
- Full assembly replacement ensures all components fit and seal correctly together rather than mixing worn and new parts
- Compatible with standard Doughboy skimmer and PP I pump configurations
Specifications & documents
- SKU: 1300-1002
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
LOWER FACE PLATE U GASKET
- Seals the lower edge of the skimmer face plate against the pool wall to prevent water intrusion behind the skimmer housing
- U-shaped profile conforms precisely to the lower face plate geometry for consistent compression and a leak-free seal
- Direct replacement for compatible Doughboy skimmer models
Specifications & documents
- SKU: 307-1030
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
RETURN FITTING U GASKET
- Replacement gasket seals the return fitting where it passes through the pool wall, preventing leaks at one of the most common failure points
- U-shaped profile provides full circumferential sealing contact around the fitting opening
- Compatible with standard Doughboy above-ground pool return fittings
Specifications & documents
- SKU: 307-1031
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SAFETY VAC PORT COVER
- Covers the vacuum port opening when not in use to prevent accidental suction entrapment, an important safety feature for pools with active swimmers
- Secure fit stays in place during normal pool operation and removes easily when vacuuming is needed
- Durable molded construction in a neutral tone compatible with standard Doughboy skimmer housings
Specifications & documents
- SKU: 348-1028
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SKIMMER FACE-PLATE (ALMOND)
- Replacement outer face plate in almond finish restores a clean, finished appearance to the pool wall skimmer opening
- Covers the wall cutout and secures the skimmer gasket assembly against the pool wall
- Almond color matches standard beige and tan above-ground pool wall finishes
Specifications & documents
- SKU: 340-1274
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SKIMMER FACE-PLATE (GRAY)
- Same reliable replacement face plate as the almond version, finished in gray to match silver and gray above-ground pool wall panels
- Secures the skimmer assembly to the pool wall and covers the cutout for a clean, professional appearance
- Direct replacement for compatible Doughboy skimmer models
Specifications & documents
- SKU: 340-2090
- Shipping weight: 1.00 lb
DURABLE • LONG WARRANTY
SQUARE BASKET & WEIGHT ASSY.
- Weighted replacement basket assembly sits firmly in the skimmer housing without floating or shifting during operation
- Integrated weight keeps the basket seated at the bottom of the housing for consistent debris capture even at high flow rates
- Complete assembly replacement ensures proper fit and function in compatible Doughboy skimmer models
Specifications & documents
- SKU: 1121-1075
- Shipping weight: 2.00 lb
DURABLE • LONG WARRANTY
UPPER FACE PLATE U GASKET
- Seals the upper edge of the skimmer face plate against the pool wall to complete the watertight perimeter seal around the skimmer opening
- Works in conjunction with the lower face plate gasket to fully seal the skimmer housing on all sides
- Direct replacement for compatible Doughboy through-wall skimmer installations
Specifications & documents
- SKU: 307-1029
- Shipping weight: 1.00 lb
Pool Safety
Pool Safety is Our Top Priority
A safer backyard starts with simple habits. Please review these tips before every swim.
Always follow manufacturer instructions, posted signage, and local codes. Adult supervision is required at all times.
Constant Adult Supervision
A responsible adult should actively watch swimmers—especially children and inexperienced swimmers.
Secure Access
Use self-latching gates, safety fencing, and remove or lock ladders when not in use.
Rules & Signage
No diving. No running. Keep furniture and toys away from the pool edge and post visible safety signs.
Expert Tip
If your pool is near a deck entry, consider a self-closing, self-latching gate at the deck opening and always lock access when the pool is not in use.
This checklist is for general guidance and does not replace manufacturer instructions or local safety requirements.